Filter By:
- Parts (274)
- Accessories (769)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Bike Equipment
$1.99
Holds stainless steel stay rods to fender
Contains:
- (1) Eyelet bolt
- (1) 10mm lock nut
- (1) Rubber cap
Compatibility:
- All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders
$4.00
Compatible with:
- Hardcore bike fenders - 700c x 45mm
- Full bike fenders - 700c x 45mm
- SpeedEZ bike fenders - 700c x 45mm
- Hardcore Recumbent bike fender - 700c rear
- Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
$4.00
Compatible with:
- Full bike fenders - 26" x 60mm
- SpeedEz bike fenders - 26" x 60mm
- Hardcore bike fenders - 26" x 60mm
- Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders.
Includes:
- Rear fender plastic clip
- Fork and brake bridge-thru bolts
- Stay bolts and lock washers
Specific compatibility w/Planet Bike fenders:
- 35mm Width: 700c x 35mm Fenders (Hardcore)
- 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent)
- 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$5.00
- Contains 2 Mudflaps and Quick-Snap Attachments
- Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately)
- For use with 45mm width fenders (sold separately)
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$6.99
- Releases front fender stays if debris is present in between fender and tire
- Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
$6.99
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 6
$7.39
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$7.90
- The seat bag alternative
- Stash your stuff at a lower center of gravity
- Two convenient size options, small or large
$8.00
- Contains 2 Mudflaps and Quick-Snap attachments
- Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately)
- For use with 60mm width fenders (sold separately)
$8.39
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$8.39
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.
$8.39
• 2 bright Nichia LEDs
• Uses 2 CR 2032 lithium batteries (included)
• 100 hour run time
• 3 modes: 2 flashing and 1 steady
• Water-resistant silicone body
$8.39
• 2 bright Red LEDs
• Includes 2 (CR 2032) lithium batteries
• 100 hour run time
• 3 mode (2 flashing modes & steady mode)
• Water resistant silicone body
$9.49
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
$9.95
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)
$9.99
- High impact Resin multi-use body with integrated cage
- Externally sealed ball bearing system
- 100mm x 82mm platform
- Weight: 316g pair (9/16")
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$9.99
The X-Long Spoiler is designed to add extra coverage to SKS fenders.
- Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models
- Easily mounted by consumer with included hardware
- Sold as Each
$10.00
Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road.
- Simple, tool-free mounting on bars from 22.2 - 35mm
- 3 lighting modes: high, low, flash
- CR2032 battery included
$10.29
- 32 lumen single LED safety light
- 2 modes - steady and flashing
- 2 CR2032 batteries included
- Water resistant design
$10.29
- 8 lumen, single LED safety light
- 2 modes - solid and flashing
- Up to 110 hour run time with 2 CR2032 batteries (included)
- Multi-fit rubber strap attachment
$10.49
Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.
$10.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$10.99
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
Page 1 of 35
Next page