Brakes/Levers/Pads

We hold a wide selection of caliper mounts to fit perfectly with our brake systems Most of our mounts are available in a choice of black or silver Brake mounts are machined from T6 2014 alloy We have designed the brackets only for the purpose stated All mounts are supplied with bolts for mounting to frame/fork KEY FEATURES - We hold a wide selection of caliper mounts to fit perfectly with our brake systems - Most of our mounts are available in a choice of black or silver - Brake mounts are machined from T6 2014 alloy - We have designed the brackets only for the purpose stated - All mounts are supplied with bolts for mounting to frame/fork

The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation. KEY FEATURES - Dot Fluid Calipers will have Bore Caps with a D etched. - Mineral Oil Caliper will have Bore Caps with an M etched. - Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount - Calipers designed to fit 140, 160 & 180mm rotors - Slimline 4 piston lightweight design - Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub - Available in Black, Silver, Bronze, Red, Blue, Purple and Orange - Top entry pad fitting - CNC machined from 2014 T6 aluminium ***Please note*** Shimano and SRAM brands belong to a third party and have no relation with Hope Technology RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems (Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo) Shimano Compatible Calipers (RX4+) Dura Ace Di2 R9270 / R9170 / R9120 / R9200 Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 / 105 Di2 R7170 / R7020 / Di2 R785 / RS685 / GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2 Campagnolo Compatible Calipers (RX4+) Ekar / Super Record / Record / Campagnolo H11 SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid) Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS / Sram Rival / Sram Apex / Sram S900

The Tech 4 X2 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. Combine this with an updated X2 Postmount or Flatmount caliper a lightweight adjustable brake. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Maxium Rotor thickness for X2 caliper 2.3mm Flatmount Caliper Mount options: - Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks - Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames - The caliper will also fit directly on Flatmount rear standard using a Ø140 disc. - For more information please see Hope's guides in the manuals and diagrams section. **Note** - The Flatmount X2 caliper is designed for use with the Hope Tech 4, Tech 3, XCR Pro and Tech/Tech Evo levers only.

Brake pads include spring clip and pin Brake pads are dyno tested in-house in Barnoldswick Available for all our current brakes and older models All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity We keep a wide range of pads to suit all our brakes

Hope Brake Lever Parts

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Brass compression olive for Hope hydraulic disc brakes.

• Compatible with most side pull and center pull brakes • All weather compound

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Replacement Rotor Bolt kits for Formula rotors - 6/pack

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

Our mountain rim brake pads are available both with a threaded or smooth post.

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design

- Compatible with most side- and center-pull brakes - Excellent for BMX and freestyle - Hex nut type - All-weather compound

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

- 50mm long molded brake blocks with hardware to fit most road calipers

Odyssey A Brake shoes for all your braking needs.

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

•Compatible with most road caliper brakes •All weather compound

•55mm cartridge inserts •Compatible with most road caliper brake pad holders •All weather performance

• All weather compound • Cantilever post style • Black • 52mm

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions

- Standard replacement cantilever/v-brake bosses

- 72mm long molded brake blocks with hardware to fit most linear brakes

Kool-Stop's C89 Series insert pad was designed to fit in Campagnolo 8 and 9 speed group systems. Also fits Shimano Dura Ace BR-7400 and BR-7403. Features: - Patented Plow Tip - Water Grooves - Dove Tail fit - Rim Friendly Compounds Options: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!