Filter By:
- 24-Inch & Smaller (73)
- 26-Inch (53)
- 650B (143)
- 29-Inch (176)
- 700c, 27-Inch & 650c (302)
- Fat Bike (5)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
HG 1800 Spline wheels help you participate in rides again; commute to work, plan longer trips, or simply discover the joy of cycling. E-road bikes are there to assist riders to keep going. In doing so, the wheels undergo higher loads and torques on longer distances, due to the extra weight and power from the specific frame/motor constructions. Hybrid Road wheels are built to assist with these additional loads by increasing the strength of the individual components that make up the wheel.
- Aluminum, sleeved rim joint rim
- Hooked bead, tubeless ready
- Inner width of 24 mm supports tires up to 50 mm
- 25mm Rim Height
- 370 Spline hub
- DT Swiss tubeless ready tape installed, DT Swiss tubeless valve and valve guard included
Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.
Alloy MTB, cyclocross, and gravel bike wheelset with the same FSA reliability and high performance technology. Suitable for use on a wide range of price point bikes.
- Compatible with cyclocross and gravel bikes
- Includes TL valves and tape
- 24 spoke front and rear
Reserve returns with the ultimate climbing wheelset; the 34/37 Turbulent Aero. Developed using Turbulent Aero data and technology, the 34/37 TA is designed to help get you up those mountain passes as fast as possible. Comparted to the original 34/37, the revised TA set is 30 grams lighter per rim, and 4 grams faster in the wind tunnel. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits.
- Designed to be your no fuss climbing wheelset. There are no weight limits, no tire limitations, and can be set up tubeless or with tubes
- Mixed profile front and rear rims provide maximum stability, lowest weight and optimized aerodynamics
- Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight
- Lifetime warranty supported by a no-fault crash replacement
- Built with DT Swiss Hubs
Versatility, durability, and performance designed for the gravel adventurer. Proven Duroc rim technology, wide tubeless channel, and easy tubeless setup, the Duroc G30 Expert is ready to roll.
- Duroc Alloy rim with welded seam
- Tubeless Ready: Factory Taped, with valves and sealant included
- Ringle SRX hubs with improved performance
- Shimano HG11 Road and SRAM XDR freehub bodies included
- 12° engagement driver
Versatility, durability, and performance designed for the gravel adventurer. Proven Duroc rim technology, wide tubeless channel, and easy tubeless setup, the Duroc G30 Expert is ready to roll.
- Duroc Alloy rim with welded seam
- Tubeless Ready: Factory Taped, with valves and sealant included
- Ringle SRX hubs with improved performance
- Shimano HG11 Road and SRAM XDR freehub bodies included
- 12° engagement driver
The all-alloy Team 35 Comp SL wheelset shares many features of other high-end wheelsets, including: aero bladed spokes, an asymmetric 2:1 rear lacing pattern, CNC machined braking surfaces, sealed cartridge bearings and hand-built quality. 35mm deep alloy clincher rims give aerodynamic benefits without an excessive weight penalty. CNC machined alloy hubs are durable and smooth-running. The Team35 is only available for Shimano 10/11spd cassettes and is an excellent training or entry-level racing wheelset.
- Alloy 35mm deep clincher rim, laced wo Alloy hubs for DP, Aero blade spokes
- Anodized black rims with CNC braking surface (The black braking surface is an aesthetic finishing, it will change color during use)
- Alloy freehub body
- Artisanal built, entirely by hand
- Includes QR and rim tape
Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway.
Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable.
Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff.
The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride.
At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability.
- Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile
- Our lightest tubeless wheel yet, making it a fast-puncher ready to fight
- Optimized tire bed for easy tire installation
- TSE for greater efficiency and reduced rolling resistance
- Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth
- Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction
- Ships with 12mm end caps
- Center Lock rotor interface. Lockring is included
- Zipp graphics applied using Zipp's ImPress direct-print technology
- Lifetime warranty
$43.49 - $48.49
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
$46.49
Sta-Tru Double Wall Front Wheels.
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
$46.49 - $54.49
Sta Tru Rear Wheels
- Single Wall rim
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher
$48.99
Get back on the bike with a genuine replacement wheel.
When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered.
PRODUCT DETAILS
- Original equipment replacement 24" rim brake wheels for Trek Kids bikes
- Does not include skewer, reflector, rim strip, valve, or owner's manual
$49.99 - $61.99
Sta-Tru Double Wall Rear Wheels.
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Valve: Schrader
- Tire Type: Clincher
$51.49
Sta Tru Rear Wheel
- 104mm spacing
- Includes 18 tooth rear cog
- Single Wall rim
- Hub/Brake Compatibility: Coaster Brake
- Wheel Size: 12-inch
- Cassette Body Type: 3 Prong Cog
- ISO Diameter: 203 / 12.5-inch
- Rim Width (Internal): 24 mm
- Tire Type: Clincher
- Rear Axle: 5/16-inch x 104mm
$51.49
Sta Tru Rear Wheel
- Hub/Brake Compatibility: Coaster Brake
- Wheel Size: 16-inch
- Cassette Body Type: Threaded Standard 1.37-inch x 24tpi
- ISO Diameter: 305 / 16-inch
- Valve: Schrader
- Tire Type: Clincher
- Rear Axle: 3/8-inch Threaded x 110mm
$54.99
Upgrade or refresh your bike.
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original equipment replacement kids wheels
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$55.99
Sta Tru Front Wheel
- Measures 9-inch across, uses a 12-inch tire
- Single Wall Rim
- Hub/Brake Compatibility: Rim Brake
- ISO Diameter: 203 / 12.5-inch
- Front Axle: 5/16-inch x 85mm
- Rim Width (Internal): 24 mm
- Tire Type: Clincher
$59.99
- Affordable and reliable 26" disc brake wheelset for entry-level hybrid, MTB and touring bikes
- Black Alex Z1000 single wall rim offers great performance and look at a low price
- Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes
- Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front axle for increased convenience
- 36 stainless steel spokes and brass nipples for improved durability
$60.99 - $62.49
Sta-Tru Double Wall Front Wheels.
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 26-inch x 1 3/8
- ISO Diameter: 590 / 26 x 1 3/8-inch
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
$61.99
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 18-inch
- ISO Diameter: 355 / 18-inch BMX
- Front Axle: 3/8-inch x 100mm
- Tire Type: Clincher
$63.99
- Position Front
- Wheel Diameter/ISO 26'' / 559
- Axle Type QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Single wall
- Rim Internal Width 19.9mm
- Rim inner width range 0-21.9mm
- Rim Color Silver
- Rim Drilling 36
- Hub Model Formula FM-21-QR
- Wheel Weight -
- Spoke Type Steel
- Valve Schrader
- Rim External Width 25.2mm
- Depth 16mm
- Rim Model Alex C1000
- Skewers Included Yes
$65.99
Upgrade or refresh your bike.
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original equipment replacement kids wheels
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$65.99
Upgrade or refresh your bike.
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original equipment replacement kids wheels
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$68.49 - $80.99
Sta Tru Rear Wheel
- Single Wall rim
- Wheel Size: 18-inch
- Cassette Body Type: Threaded Standard 1.37-inch x 24tpi
- ISO Diameter: 355 / 18-inch BMX
- Valve: Schrader
- Tire Type: Clincher
- Rear Axle: 3/8-inch Threaded x 110mm
$69.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
$69.99 - $74.99
Sta-Tru Double Wall Rear Wheels
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 700c
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 622 / road / 29"
- Valve: Schrader
- Tire Type: Clincher
$69.99
- EVO E-Tour 20 24" double wall rim - Silver
- Inner Rim Width: 19.8 mm
- Rim Height: 16.8 mm
- Pin joint construction
- No Eyelets
- Schrader valve
- 36 holes
$69.99
- EVO E-Tour 20 24" single wall rim - Silver
- Inner Rim Width: 19.8 mm
- Rim Height: 16.8 mm
- Pin joint construction
- No Eyelets
- Schrader valve
- 36 holes
$69.99
- Position Front
- Wheel Diameter/ISO 26'' / 559
- Axle Type Bolt-on or QR
- Hub Spacing 100mm
- Wheel-Brake Comp. Rim
- Freehub Body -
- Wheel Tire Type Clincher
- Rim Material Aluminum
- Rim Construction Single wall
- Rim Internal Width 19.8mm
- Rim inner width range 0-21.9mm
- Rim Color Silver
- Rim Drilling 36
- Hub Model Formula FM-21
- Wheel Weight -
- Spoke Type Steel
- Valve Schrader
- Rim External Width -
- Depth 16.8mm
- Rim Model Evo E-Tour 20
$73.99
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Upgrade or refresh your bike.
- Original equipment replacement Bontrager Connection Disc wheels
- Durable double-wall rim with 20mm internal, 26mm external width
- Black rim graphics and spoke nipples
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
Page 1 of 25
Next page