Floor Pumps

- Foot-operated - Gauge - Thumb lock

Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve

Keeping your bike's tires properly inflated is the best way to ensure a happy ride. Maintain pressure and avoid pinch flats with MSW AirLift Floor Pumps. - Dual head works on both Presta and Schrader valves - Steel Barrel with durable composite base - Max pressure: 150 psi - 32-inch long hose - 2.5-inch diameter gauge - On-board inflation adapter kit for toys, balls & rafts - Overall height: 25-inches

Deluxe steel floor pump – Metallic Grey Make sure you ride in comfort with the correct tire pressure. Planet Bike's redesigned STX floor pump has a big 3" integrated gauge and the Auto Head fits both Presta and Schrader valves. It’s engineered for smooth and efficient inflation. - Rugged steel barrel, plunger, and base - Anatomically designed handle for comfortable air compression - Auto Head fits both Presta and Schrader valves - Oversized 3 inch 160 psi dial gauge - Pressure rated to 200 psi - Needles included for pumping up sports balls - Large steel base for stability - Rebuildable - Height: 27”

This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.

Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.

- 22" high flow steel barrelled floor pump - Presta/Schrader auto select head - Ball needle and inflator adapters included - 2" EZ Read gauge - 160psi maximum

- High-flow steel barrel - 160 PSI high-pressure pump - Sturdy base, ergonomic T handle, long hose - Thumblock head for Schrader valves with Presta-valve adapter

- Tall 26" floor pump requires less bending over and features a 2.5" easy to read gauge - Steel barrel and base with plastic gripped foot pad - Autohead fits Schrader or Presta valves

• High-flow steel barrel • 160 PSI high pressure pump • Sturdy base and Ergonomic T- handle • Schrader valve w/ thumblock & presta adapter • EZ Read gauge

• Large gauge • 160 psi (11 bar) • Dual head fits Presta and Schrader valves

While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning

Originally designed in the 1950s when the Bianchi-Pirelli team requested a pump that could fit under the rear seat of the Fiat team car, the Pista pump quickly became an icon of professional team cars and mechanic workstations at 6-Day track events around the world. The compact form of the pump, and the ability to lay completely flat, allow the pump to take up minimal space in a trunk, duffel bag, or larger tool kit, making it a true icon of the sport amongst the cycling cognoscenti. In 2017, we took all of the qualities of the original Pista and introduced a re-engineered, limited-edition version of the pump with the iconic Molteni orange barrel to celebrate 100 years in business. These modern orange pumps were initially meant to be a limited-release product to celebrate our heritage, but the positive response and demand for the product have continued. As we're now in our second century of making high-performance pumps, we're pleased to make Pista part of our permanent floor pump line-up and will offer it in a modern red livery moving forward. - Durable, high-strength steel barrel - Compact ash wood handle with hose guides - High-efficiency SILCA leather piston assembly - Brass check-valve assembly - Long filler hose with integrated Schrader chuck - Push-on alloy Presta chuck with bleeder valve - Rated to 220psi

The Airstep Bicycle Foot Pump combines the virtues of a classic floor pump with a foot pump. - Extra-large pressure gauge - Integrated storage space for the spiral hose and head - Aluminum foot pedal allows you to inflate with the ergonomic strength of your legs - Pump locks down and includes a wall bracket as a space-saving solution - Inflates to 7 bar/102 psi - Compatible with Presta, Schrader, and Dunlop Valves - Made in Germany

Sunlite's Model W Floor Pump has a 20-inch tall steel barrel for easy inflation. For easy transport and storage, the base features folding feet. The easy-to-use thumblock head fits all of your Schrader valve tubes.

The TLC LITE is the indispensable essential that provides a simple solution for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 105PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 225/60R18. The TLC LITE comes in a rugged steel case with a durable handle, and is powered by simply plugging into your vehicle's power port. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Shop-Style Inflator with 120 PSI Gauge – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – Deluxe Carry Bag – Accessory Power Plug – Durable Leather Tipped Handle SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 10% @ 100 PSI – Max. Working Pressure: 105 PSI – Max. Amp/Watt Draw: 13A/156W – Ingress Protection Rating: IP54 – Max. Ambient Temp: +158°F – Min. Ambient Temp: -4°F – Dimensions: 9.64?L x 4.33?W x 9.68?H – Net Weight: 4.44 lbs. – Air Hose Length: 30 ft. – Power Cord Length: 10 ft.

The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31". The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Thermal Overload Protector – Shop-Style Inflator with 120 PSI Gauge – 120 PSI Pressure Gauge with Rubber Boot – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – 2-Pin SAE Connection with Battery Terminal and Clamp Options – Deluxe Carry Bag SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 30 min. @ 30 PSI – Max. Working Pressure: 120 PSI – Max. Amp Draw: 23-Amps – Ingress Protection Rating: IP54 – Dimensions: 6.8?L x 3.7?W x 6.5?H – Net Weight: 5.75 lbs. – Power Cord Length: 6ft.

An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb

The Gravel Digital Drive Pro is the ultimate bike floor pump with a medium-sized barrel designed specifically for gravel bikes and other mid-volume tires. The chuck is tubeless specific and “flips” for Presta, or a threaded Presta shaft (with the valve core removed) to provide more airflow for seating tubeless tires. Its barrel, piston and base are meticulously machined from premium aluminum and complemented by a comfortable, stylish wood handle. Pumping is versatile and more efficient thanks to an extra-long hose and a larger 3.5” (88.9 MM) digital gauge, which provides precise measurement up to 100 PSI (6.9 BAR). The Gravel Digital Floor Drive Pro is built in-house, 100% quality controlled and fully rebuildable for long-lasting operation. - CNC-machined aluminum construction - Precision 3.5-inch digital gauge (100 psi / 6.89 bar) - Extra-long nylon-reinforced braided hose with aluminum couplers - Varnished wood handle - ABS1 Pro with Presta / valve stem chuck

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

Planet Bike's redesigned ALX floor pump is rugged and accurate. Its smooth stroke, big 3" integrated gauge and no-fuss Auto Head will get you back up to pressure. More than just a work horse, the striking red anodized barrel and classic wood handle make this pump a thing of beauty. - Lightweight anodized 6000 series aluminum barrel - Classic wood handle for comfortable air compression - Auto Head fits both Presta and Schrader valves - Oversized 3 inch 160 psi dial gauge - Pressure rated to 200 psi - Needles included for pumping up sports balls - Large steel base for stability - Rebuildable - Height: 27”

The Rennkompressor is the sole legitimate ancestor of all floor pumps on the market today and has been produced for over 50 years at the SKS factory. The Rennkompressor is known around the world as a long-lasting, excelling performing pump. The pump features a steel tube, iron base, and wooden handle. The pump is fitted with an MV Easy Valve head for use with all valve types, but other head/hose combinations are available. - Inflates to 16 bar / 230 psi - Compatible with Presta, Schrader, and Dunlop Valves - Replacement/rebuild parts are available - 254 cc of air volume per stroke - Height: 650mm - Made in Germany

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb

Composite and steel floor pump – Arcade White A strong and dependable pump belongs in every garage or basement. Our redesigned Comp floor pump features a big 3" integrated gauge, steel barrel and the Dual Head for Presta and Schrader valves. With included sport ball needles and classic good looks, it’s designed for smooth, efficient and accurate inflation. - Super-tough steel barrel and plunger with a composite base - Anatomically designed handle for comfortable air compression - Dual Head fits both Presta and Schrader valves - Oversized 3 inch 160 psi dial gauge - Pressure rated to 200 psi - Needles included for pumping up sports balls - Large base for stability - Rebuildable - Height: 25”

Lezyne's Sport Digital Drive Pump is built to last with steel barrel and piston with a molded composite matrix base. It's extremely accurate digital gauge and extra-long, high-strength hose with composite matrix couplers deliver high function and durability. Tough, painted finish with varnished wood handle. - ABS2 equipped

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

- Black anodized alloy barreled floor pump with integrated analog gauge - Composite handle and wide base make for a stable pumping platform - Reversible head is compatible with Presta and Schrader valves - Includes ball inflation accessories - Max PSI: 160psi

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

- Great entry level pump in a compact form - Features a steel air chamber plastic base and rubber textured handle for easy grip - Updated MV Easy Head valve allows for Presta/Schrader/Dunlop valves and also is consumer serviceable